How to stretch watercolor paper with masking tape with manual
So How to stretch watercolor paper with masking tape we make it and here these list of best for your inspiration and informational purpose regarding the How to stretch watercolor paper with masking tape as part of How To Do That exclusive updates collection. So, take your time and find out the best How to stretch watercolor paper with masking tape photos and pictures posted here that suitable with your needs and use it for your own collection and personal use.Your tape should not be dripping. (if it helps, you can use a few small pieces of tape to hold the paper in place as you tape your first edge.)
Fill a large sink or bath with water and submerge the paper, rolling or folding it as necessary, but avoiding creasing it. Paper can be stretched up to a size of approximately 1.5m x 2.5m but if you go beyond that, the tension in the paper will be too strong. Remember to apply a little water to the adhesive of the paper but not too much as that can ruin the glue.
Then, holding the tape evenly over the whole length lower the tape strip all at once to the edge of the paper, half on the paper and half on the board.
Try to leave the paper in a warm dry place to dry overnight or if you are in a hurry leave it some minutes. You’ll have to flip the paper a few times to adequately saturate the paper enough to stretch it. Once the paper is dry, it will be stretched tight on the board and will not warp when watercolor is added. After measuring the paper dimensions, straighten the piece and start cutting the tape to cover around 0.25 to 0.5 inches of the paper edges.
